56
Electrical cabinet
-
Visual control of cable linings. See to that they’re not damaged or running over sharp machine edges. Check
the electrical cabinet casing. No damage is made to the cabinet housing and rubber gasket is ok. Se chapter
5.8.2 Electrical scheme for further details.
Check that all electrical contacts is in good condion, and correctly mounted.
Check the driving lights and other lightening equipment are in working order.
Check that all the emergency switches is OK and working properly.
There are three fuses in the machine’s electrical system .
Master fuse, directly on power-supply cable. 40 A
Fuse for lights, in cabinet. Fuse holder in rubber 15 A
Fuse box, in front of cabinet. Content see chapter: 5.8
Fuse for lights, 15 A
Fuse box
Master fuse, 40 A
Light switch cabinet
To Next Page
Loading...