ORKEL MP 2000 - 5.2.6 Approved lubrications

77
 
-(Internaonal Standardizaon Organizaon - Viscosity Grade )
The ISO standard 3448 divide industrial oils in to several ISO-VG classicaons. The standard tells which vis-
cosity the oil are suppose to have at 40°C. The lower the ISO -grade is, the thinner the oil gets.
-°°
 

Use hydraulic oil of ISO VG 32 classicaon when operang in temperatures between ÷15°C l 30°C
 Shell Tellus 32
Statoil HydraWay HVXA 32
UNO X Rando HD 32
As an alternave, use hydraulic oil of ISO VG 46 classicaon, if operang in higher ambient temperatures.
Between ÷10°C l + 50°C
 Shell Tellus 46
Statoil HydraWay HVXA 46:
UNO X Rando HD 46

 Use regular motor oil, SAE 10W - 30 /40 or SAE 15W - 40 to lubricate the chains
 Shell Helix HX5
Statoil ClassicWay
Havoline Premium 15W - 40
 Use grease of NLGI 2 class, with extra protecon (EP) addives.
 Shell GADUS S3 V220C 2
Statoil Greaseway CAH 92
UNO X Mulfak EP 2

 Use gear oil, Shell Omala S2 G 220