Orlaco FAMOS - User Manual

ORLACO
www.orlaco.comwww.orlaco.com
Orlaco is a Manufacturing company that specializes in
making cameras and monitor systems for commercial
vehicles, fork-lift trucks, cranes, off shore and maritime.
Our objective is to design and produce camera systems for
the professional market that improve the drivers’ view and
increase operating efficiency.
At our facility in Barneveld we locate our design,
manufacturing, warehousing and service department.
Vision is our mission
®
. Orlaco therefore deploys the
development, manufacture, supply and service of camera
and display systems that will improve safety and efficiency
of all vehicles, machinery and vessels. Our systems give the end user a view on each blind
spot and will create comfort and improved working conditions. Our active approach will
support market demands and innovations and will lead to enthusiastic ambassadors in the
market; our customers.
For more information: www.orlaco.com
Camera FAMOS
Installation manual
Including specifications
No. IM0973510 A 12
1/2015
English

Summary

ORLACO Introduction

Company Profile

Describes Orlaco's specialization in camera and monitor systems for professional markets.

Camera FAMOS Manual

Manual Overview

Introduces the installation manual for the Camera FAMOS, including specifications.

Safety Instructions

General Safety Precautions

Essential rules: do not open enclosure, avoid extreme temperatures, manufacturer repairs only.

Installation Safety Guidelines

Specific rule: minimum camera height must be at least 2m above the ground.

Revision Details

1. Mounting and Connecting Camera

1.1. Universal Camera Bracket

Details the components and assembly of the universal camera mounting bracket.

1.2. Camera Attachment

Instructions on how to securely attach the camera using the bracket.

1.3. Camera FAMOS IRLED M12 LED Power Off

Specific connection details for the IRLED M12 model with power off.

1.4. Aiming the Camera

Guidance on positioning the camera for optimal field of view.

1.5. Camera with Molded Connectors

Instructions for mounting the standard cable with molded connectors.

1.6. Finish

Final steps or considerations for completing the installation.

1.7. Camera FAMOS IR LED Mounting Instructions

Specific mounting instructions for the IR LED camera variant.

4.3. FAMOS General Mechanical Specifications

2. Pin Connection

FAMOS 4-Pin Connector Pinout

Detailed pin assignments for the 4-pin molded connector.

M16 7-Pin Connector Pinout

Detailed pin assignments for the M16 7-pin molded connector.

3. Description Camera

3.1. FAMOS Lens Angle Specifications

Lists horizontal and vertical lens angles for various FAMOS models.

3.2. FAMOS Mirror Lens Angle Specifications

Lists lens angles for FAMOS Mirror camera models.

3.3. FAMOS Mirror SW Lens Angle Specifications

Lists lens angles for FAMOS Mirror SW camera models.

3.4. FAMOS IR LED & IRLED Variants

Covers lens angle specs for IR LED, IRLED poweroff/poweron models.

3.8. FAMOS IR Lens Angle Specifications

Lists lens angles for FAMOS IR camera models.

4. Camera FAMOS Specifications

4.1. Camera FAMOS & FAMOS IR Sensor Specifications

Details video signal, sensor element, and light sensitivity.

4.2. Camera FAMOS IR LED Sensor Specifications

Details sensor element and light sensitivity for IR LED models.

Electrical Specifications

Covers power input, consumption, inrush current, heater, and transient protection.

4.3. FAMOS General Mechanical Specifications

Details housing, ingress protection, mounting hardware, shock, bracket, and weight.

6. Disposal

7. General Terms and Conditions

4.4. Camera FAMOS 102° PAL;NTSC Mirror SW Graticule

5. Maintenance and Cleaning

Orlaco FAMOS Specifications

General

Video system	PAL/NTSC
Vibration resistance	50G
Protection class	IP69K
Frame Rate	30 fps
Sensor Type	CMOS
Lens Type	Fixed
Operating temperature	-40°C to +85°C
Power Supply	12V to 24V