EasyManua.ls Logo

Orlaco 0506972 - User Manual

Orlaco 0506972
12 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Camera PT TIC Alu/Sst
Installation Manual
Manual no. IM0973171, A 01
Article no. 0506972, 0506982
7/2012
English
Art. no. 0506972 Camera PT TIC Alu
Art. no. 0506982 Camera PT TIC SSt,

Table of Contents

Questions and Answers

  • R
    Rachel TaylorAug 3, 2025
    What to do if my Orlaco Digital Camera monitor does not work?
    • B
      Bailey UnderwoodAug 3, 2025
      If your Orlaco Digital Camera monitor isn't working, there are several potential causes: * The system might not be switched on. In this case, connect the power cable to the correct power supply. * The system might not be properly connected, or the vehicle's voltage supply is too low (indicated by a flashing LED on the camera). Ensure the system is correctly connected and measure the vehicle's voltage supply when the system is on. * The vehicle's supply voltage fuse might be defective. If so, replace the fuse.
  • E
    Elizabeth GarrettAug 18, 2025
    Why does my Orlaco Digital Camera monitor have no picture?
    • M
      Melissa SawyerAug 18, 2025
      If your Orlaco Digital Camera monitor displays no picture, it could be due to the following reasons: * The monitor might not be connected correctly to the control box. Check the monitor's connection. * The camera itself might not be functioning.

Summary

Safety

Safety Instructions

Essential safety instructions to guarantee safe operation of the equipment before use.

Mounting

Mounting Safety Cables

Procedure for attaching safety cables to ensure secure installation and prevent falls.

Electrical Installation

PT TIC Cable Specifications

Detailed pinout and function of each wire in the PT TIC unit's base cable.

Instructions for Use

Using the Monitor

Troubleshooting

Maintenance and Cleaning

Product Specifications

Thermal Image Camera Specifications

Pan & Tilt Specifications

General Specifications

Visca Commands

Pan;Tilt Serial Commands

Old Pan;Tilt Commands

New Pan;Tilt Commands

Generic Serial Commands

Pan;Tilt Serial Commands (V3.0.0)

Old Pan;Tilt Commands (Orlaco Specific)

New Pan;Tilt Commands (General Visca)

Additional Zoom Camera Serial Commands

Additional TIC Camera Serial Commands

Orlaco 0506972 Specifications

General IconGeneral
Video standardPAL/NTSC
Vibration resistance50G
Protection classIP69K
HousingAluminium
Operating temperature-40°C to +85°C

Related product manuals