– 53 –
Use four new, longlife 1.5V AAA batteries. Do not use batteries bey-
ond their expiration date. If the monitor is not going to be used for a
prolonged period the batteries should be removed.
You can also operate this instrument using rechargeable batteries.
• Only use „NiMH” reusable batteries!
• If the battery symbol the batteries must be removed and rechar-
ged! They must not remain inside the instrument, as they may
become damaged through total discharge even when switched
off. The batteries must NOT be discharged in the blood pressure
monitor! If you do not intend to use the instrument for a week or
more, always remove the rechargeable batteries!
• Recharge these batteries using an external charger and follow ma-
nufacturer’s instructions carefully.
You may also operate this monitor using the AC adapter (output 5V
DC 1A with Micro USB plug).
Use only the approved AC adapter to avoid damaging the unit.
a) Ensure that the AC adapter and cable are not damaged.
b) Plug the adapter cable into the AC adapter port on the right side
of the blood pressure monitor.
c) Plug the adapter into your electrical outlet. When the AC adapter
is connected, no battery current is consumed.
To Next Page
Loading...