Need help?Do you have a question about the ORTEC 575A and is the answer not in the manual?
Defines DANGER, WARNING, and CAUTION levels for safety instructions.
Explains symbols like ATTENTION and DANGER – High Voltage found on the product.
Warns about dangerous voltages when opening the instrument and advises disconnecting power.
Explains the purpose and mechanism of pole-zero cancellation for reducing pulse undershoot.
Details gain range, pulse shape, linearity, noise, temperature stability, walk, and overload recovery.
Details how to connect the 575A to a NIM bin's power supply and safety precautions.
Explains connecting the preamplifier to the 575A, including input impedance and termination.
Explains how to set the GAIN, POS/NEG, PZ ADJ, and SHAPING controls.
Provides a step-by-step guide for setting up the detector, preamplifier, and amplifier in a system.
Details the critical adjustment of the PZ ADJ control for optimal performance, with visual examples.
Describes an alternative method for precise pole-zero adjustment using a square wave input.
Explains how to measure amplifier noise and resolution using a pulse generator and voltmeter.
Guides on setting up and calibrating a system for high-resolution alpha-particle spectroscopy.
Discusses using the 575A in high-resolution gamma spectroscopy with different detector types.
To Next Page
General