Need help?Do you have a question about the ORTEC 142A and is the answer not in the manual?
General| Operating Temperature | 0 to 50 °C |
|---|---|
| Input Polarity | Positive or Negative |
| Input Impedance | 1000 ohms |
| Maximum Output Voltage | 10 V |
| Maximum Output Current | +10 mA |
| Integral Nonlinearity | 0.05% |
| Power Supply | ±12 V |
Procedures for ensuring instrument quality before shipment.
Guidelines for returning the instrument for repair and service.
Instructions for handling and reporting damage during shipment.
Details about safety warnings and cleaning procedures.
Technical performance parameters like noise, sensitivity, and timing.
Details on input signal types and bias voltage.
Description of energy (E) and timing (T) output signals.
Information about input, output, and power connectors.
Specifications for power requirements and physical dimensions.
How to connect the detector to the preamplifier input.
Connecting the energy output to a shaping amplifier.
Connecting the timing output to timing modules.
Details on supplying operating power to the preamplifier.
Using test pulses for calibration and system testing.
Connecting the detector bias voltage supply.
General overview of the preamplifier circuitry and components.
Procedures for setting and adjusting detector bias.
Detailed description of the energy output signal characteristics.
Detailed description of the timing output signal characteristics.
Adjusting bandwidth compensation for optimal rise time.
Information on the built-in input protection circuit.
Procedures for testing preamplifier performance.
Guidelines for cleaning the preamplifier components.
Instructions for returning the unit for factory service.
To Next Page
