11
Now your ORTHOMOUSE is ready to use.
Care and maintenance
To clean the ORTHOMOUSE you need to first to disconnect it from the computer. Then, just
swipe a damp cloth over its surface. The area around the sensor must be cleaned with a flexible
cotton swab moistened with water and neutral soap.
Be careful not to scratch its surface
.
Fig. 9 – Flexible cotton swab
ORTHOMOUSE: Your Comfort Connection
Technical Data
Technical Data
Height: 65 mm (2.56 inches)
Width: 82 mm (3.23 inches)
Length with short prolonger: 113 mm (4.45 inches) *
Length with medium prolonger: 121 mm (4.76 inches) *
Length with long prolonger: 136 mm (5.35 inches) *
Coating: engineering plastic
Sensor sensitivity: 800 dpi
USB connection
Cable length: 1.80 m (70.86 inches)
Class 1 LED device
This product uses a LED that is rated as Class 1 according to International Standard IEC 825-1:1993.
(*) length without cord
To Next Page
Loading...