Ortovox S1 Quick Reference Guide

10
11
9
34 35
ENGLISH
WEARING THE
PROTECTIVE CASE
Hold the shoulder strap
on the protective case
by the silver-coloured
application (11) with
the label ‘shoulder’ and
place this over your
head and shoulder.
Pull the free end of the
strap around your back
and connect to the
case using the snap
buckle (10).
TO OPEN
Take the S1 from the
protective case, press
both release buttons (6)
at the same time and
then open the S1.
OPERATING INSTRUCTIONS for the ORTOVOX S1 avalanche transceiver
SWITCH ON
Press the ON/OFF
button (1) to switch on
the S1 and wait for
the result of the equip-
ment self-test.
SWITCH off
Press the ON/OFF
button (1) for
5 seconds.
EQUIPMENT
SELF-TEST AND
TRANSMISSION
Following a positive
equipment self-test
(symbols for transmit,
receive, additional
function and battery
capacity appear on the
screen and are marked
as positive) close the S1.
The S1 will now trans-
mit and the transmission
monitoring lights on the
side (4) will flash.
TRANSMISSION AND
AUTOMATIC SAFETY
SWITCH FOR TRANS-
MISSION:
If the S1 is closed while
switched on the equip-
ment will continue to
transmit and the trans-
mission monitoring
lights will flash.
If the S1 is not moved
for 90 seconds while
open then the trans-
mission mode will also
be automatically activated
from every operation
type. In the event of a
subsequent avalanche
the S1 switches to
transmission after 90
seconds (time can be
set at between 30 and
120 seconds).
RECEIVE = SEARCH:
Open the S1. The
search situation will be
displayed automatically
on the screen (2).

Ortovox S1 Specifications

General

Brand	Ortovox
Model	S1
Category	Transceiver
Language	English