Need help?Do you have a question about the Orwak 3120 and is the answer not in the manual?
General| Type | Vertical Baler |
|---|---|
| Model | 3120 |
| Brand | Orwak |
| Motor power | 2.2 kW |
| Power Supply | 400V, 3-phase, 50Hz |
Operators must read and follow the manual, understand safety procedures, and contact support if in doubt.
Explains safety symbols used within the manual, such as warnings and instructions for power disconnection.
Details safety signs found on the baler, including high voltage warnings and procedures for cleaning/servicing.
Defines user duties, including safety checks, daily inspections, and ensuring defects are rectified.
Crucial precautions like operating only when trained, avoiding high center of gravity issues, and using qualified personnel.
Describes built-in safety mechanisms like door interlocks, emergency stop buttons, and protective guards.
Detailed instructions on how to properly attach and secure the baling straps to the machine.
Guidance on loading waste, closing doors, and initiating the compaction cycle for effective baling.
Procedures for safely removing a full bale, including strap cutting and bale release.
Specific steps for installing the machine, focusing on the cylinder connection and component securing.
Includes information on machine weight, dimensions, recommended space, and loading aperture.
Details on the machine's electrical system, including voltage, motor, fuse, and protection class.
Specifies hydraulic parameters such as working pressure, press force, cycle time, and oil volume.
Visual representation of the machine's physical dimensions and layout for reference.
Specific checks to perform weekly, including door switches, emergency stop, and general machine integrity.
Actions to take if the machine fails to start or the bale does not release, including contacting service.
Procedure and considerations for changing the hydraulic oil, including environmental disposal.
To Next Page
