②
②②
②
Memorizing the position
1. At the desired position, pushＳＴＯＰbutton
for 5-6 seconds, and then push
ＤＯＷＮbutton within 2 seconds.
2. Upon receiving the command, the screen
moves up approx. 10cm, and then
stops at the preset position.
●
●●
●
To lift down the projection position
①
①①
①
Deploy the screen
Push ＤＯＷＮ button for 5-6 seconds
and the screen starts to come down from
the preset position.
Push ＳＴＯＰbutton.
②
②②
②
Stop at the desired position
Use
ＵＰ&
ＤＯＷＮbuttons and push
ＳＴＯＰ
button at the desired position.
③
③③
③
Memorizing the position
1. At the desired position, pushＳＴＯＰbutton
for 5-6 seconds, and then push
ＤＯＷＮbutton within 2 seconds
2. Upon receiving the command, the screen
moves up approx. 10cm, and then
stops at the preset position.
※
NOTICE
If the ＤＯＷＮbutton is pushed for some
time and left as it is, the screen comes to
the factory default position, and stops.
The screen cannot be lower than this
position.
To Next Page
Loading...