- 27 -
EN
Support leg for size class 40–105 cm
• Fold out the support leg underneath the child
car seat. For children under 105cm in height,
the child car seat may only be used with the
Isofi x support leg folded out together with the
Isofi x connectors.
• Press the buttons on the side to adjust the
height of the support leg and extend the tele-
scopic support leg. Make sure that this is fully
in contact with the footwell of your vehicle.
• Ensure that the indicator on the support leg is
showing green.
• Size class 100–150 cm: The support leg is not
needed in this size class. Please fold in the
support leg.
Isofi x connectors
• Press the two side Isofi x connector buttons
to extend the length of the Isofi x connectors.
• Guide the Isofi x connectors to the Isofi x an-
chor points on the car seat and snap them
into place.
• Push the child car seat in until it rests securely
against the backrest of the vehicle seat. En-
sure that both Isofi x indicators are showing
green.
40–105 cm:
To Next Page
