osann SWIFT360 - Adjustment of the belt; Adjustment of the head support height; Opening;closing the belt

- 21 -
USE OF THE CHILD CAR SEAT
Only rear-facing
90°
Adjustment of the belt
• To loosen the belt, press the button for belt adjust-
ment in seat area with one hand.
• Use your other hand to hold the buckle in place
with the attach belts and then release it.
• To secure the belt, pull on the front adjustment
belt.
Adjustment of the head support
height
• Release the belt and pull the red lever to set the
head support to the right height on the reverse
side.
• Release the lever and ensure that the head sup-
port is locked.
Opening/closing the belt
• To unlock the belt, press the red button of the
buckle and separate the two tongues of the buck-
le.
• To lock the belt, rst connect the 2 tongues of
the buckle and then insert them together into the
buckle.
EN