Osburn 2400 Insert - User Manual

34 pages

To Next Page

To Next Page

Loading...

READ AND KEEP THIS MANUAL FOR REFERENCE

45111A

Printed in Canada 11-06-2014

OWNER`S MANUAL

2400 MODEL INSERT

US ENVIRONMENTAL PROTECTION

AGENCY PHASE II CERTIFIED

WOOD INSERT

Verified and tested following

ULC S628 and UL 1482 Standards

by:

Manufactured by: STOVE BUILDER INTERNATIONAL INC..

250, rue de Copenhague, Saint-Augustin-de-Desmaures (Quebec) G3A 2H3

Tel.: 418 878-3040

Fax: 418 878-3001

www.osburn-mfg.com

This manual is available for free download on the manufacturer’s web site. It is a

copyrighted document. Re-sale is strictly prohibited. The manufacturer may update this

manual from time to time and cannot be responsible for problems, injuries, or damages

arising out of the use of information contained in any manual obtained from unauthorized

sources.

Table of Contents

Questions and Answers

A
Amy ChenJul 31, 2025
What to do if wood burns poorly in my Osburn 2400 Insert Indoor Fireplace?
- L
  Lori GarciaAug 1, 2025
  If the wood in your Osburn Indoor Fireplace burns poorly, is slow to start, or produces no heat, several factors could be responsible. A low draw might be the cause, suggesting an upgrade to the chimney. Using wet or decayed wood can also lead to these issues, so ensure you're using proper fuel. Additionally, a blocked intake air supply could be the problem. Check the intake air supply by removing the fan from the insert and opening a window.
M
Michael GarnerAug 9, 2025
Why is there smoke in the room from my Osburn Indoor Fireplace?
- F
  fhaynesAug 9, 2025
  If you're experiencing smoke in the room with your Osburn Indoor Fireplace, several factors could be the cause. It might be due to a down draft, in which case upgrading the chimney is recommended. A blocked chimney could also be the culprit, suggesting a need for cleaning. Ensure the chimney damper is open, or consider removing it. Check that the baffle is correctly positioned. Finally, if new paint is curing, refer to the instructions for specific guidance.
R
rrobinsonAug 20, 2025
Why does wood burn too fast in my Osburn Indoor Fireplace?
- C
  Christopher BurtonAug 20, 2025
  If the wood in your Osburn Indoor Fireplace burns too fast, it may be due to too much draft in the chimney. In this case, contact a qualified technician for assistance.

Osburn 2400 Insert Specifications

General

Brand	Osburn
Model	2400 Insert
Category	Indoor Fireplace
Language	English

Summary

Pre-Installation Requirements

Masonry Fireplace Requirements

Checks for safe installation, condition, liner, clearances, and opening size of the existing fireplace.

Venting Requirements

Guidelines for flue, liner, and chimney construction for optimal performance and safety.

Installation

Installation Instructions

Steps to inspect the fireplace and ensure it meets safety and code requirements for installation.

Compliance of the Masonry Fireplace

Positioning the Unit

Minimum Masonry Opening, Clearances, and Floor Protector

Requirements for fireplace opening size, clearances, and non-combustible floor protection.

Connector Installation

Baffle & Brick Installation

Operation

Safety Information

Crucial safety guidelines for operating the insert, including fuel type and fire management.

Fuel

Lighting a Fire

Maintaining the Fire

Maintenance

Care and Cleaning

Glass Cleaning

Ash Removal

Chimney Cleaning

Importance of regular chimney maintenance and cleaning to prevent fires.

Creosote Formation and Removal

Explanation of creosote formation and the necessity of its removal to prevent chimney fires.

Troubleshooting

Related product manuals

Preview: Osburn INSPIRE 2000

Osburn INSPIRE 2000

Preview: Osburn MATRIX

Preview: Osburn 3500

Preview: Osburn 1700-I

Osburn STRATFORD II OB04007