Attach the fixed part of the bracket with 4 Screws M6 and 4 washers (tightening
torque 5 Nm)
ATTENTION: Use the correct orientation according to your chosen mounting
option
Now attach the adjustable bracket part (3) with the Vision Unit (1) horizontal to
the fixed bracket part (6) with the 2 flange screws M5x40 (7) and slightly tighten
the 2 flange nut M5 (8).
ATTENTION: During the OSCAR installation Setup the VU will be checked if it is
aligned properly or if the VU must be tilted up or down. (see chapter Setup User
Interface - Setup)
After Setup is finished, tighten the 2 flange screws and nuts to fix the VU.
To Next Page
Loading...