8
180625
Button three (3): Max display
Press the button to display the highest temperature.
Button four (4): Min display
Press the button to display the lowest temperature.
Button five (5): Checking the temperature and down
Used to display the value set for the cooling compartment, for example +5 ºC (factory setpoint). To
change the value set for the cooling compartment, proceed as follows:
1. Depress control button five (5)
2. To increase the temperature press button one (1) at the same time.
3. To decrease the temperature press button two (2) at the same time.
Button six (6): Main switch
Depress for 10 seconds to switch the power on or off. Power is cut to the cabinet when the power
cable is unplugged.
To Next Page
Loading...