OSCILLA SM930 - User Manual

ID: 993 / ver. 206
1
USB Calibration Software
Instructions for Use
Oscilla® USB100-series, USB300-series,
SM450-FF, SM930, SM950,
TSM400, TSM500, T830 and T840

Summary

Installation of the Oscilla Device

Installation of the Software

General Use of the Calibration Software

Use of the Program with USB1 xx, USB3 xx and SM450 FF

Use of the Program with SM930 and SM950

Air conductor calibration

Calibrate sound pressure for 11 frequencies using sliders.

Use of the Program with TSM400, TSM500, T830 & T840

Calibration of probe tone

Calibrate probe tone using an artificial ear and 2cc coupler.

Pressure calibration

Calibrate pressure sensor using a manometer.

Air conductor calibration (only TSM500)

Hearing Level Offsets

SPL or HL Calibration Mode

HL Mode

SPL Mode

Calibration Certificate

Correction Values for Microphone and Mastoid

OSCILLA SM930 Specifications