EasyManuals Logo

OSD Audio SRT4 GEN2 User Manual

OSD Audio SRT4 GEN2
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
SETUP
Airplay 1
The device supports Airplay1, you can choose Airplay1 in iOS device and play music.
Listen to local music
The SRT4 Gen2 can stream local music stored in your Smartphone, USB storage device, NAS using DLNA
protocol, PC software like iTunes, or UPnP/DLNA 3rd party software. Click on “My Music” to select the local
device you want to play from.
Note: iOS-based devices have blocked the access to iTunes library.
Our system only supports NAS using DLNA protocal.
Using the SRT4 Gen2
Once you have connected your mobile to network and installed the OSD Audio Player App in your mobile
device, you can start playing music to different rooms or the same music in all rooms in sync.
Selecting a Zone
In the OSD Audio Player APP you will see all the connected devices in the same network
1. Select the device you want to control; A green rectangle will highlight the selected Device
2. Select Browse on left side of the Bottom Tool Bar, note the highlighted selection turns dark green
3. From the Browse Screen, Select an online or local music source from the list to start streaming your music
(Some sources will need a subscription)
Available Connected
Devices
Browse Sources

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the OSD Audio SRT4 GEN2 and is the answer not in the manual?

OSD Audio SRT4 GEN2 Specifications

General IconGeneral
BrandOSD Audio
ModelSRT4 GEN2
CategoryMedia Player
LanguageEnglish