EasyManua.ls Logo

Oshion MD-A1 - Target Indications and Tones; Numeric Target Ranges; Types of Target Identification; Tone Indicators

Oshion MD-A1
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.TARGET INDICATIONS
1.
Numeric ranges of target:
-IRON: 00-10
-5¢: 11-20
-P-TAB: 21-40
-ZN(1¢): 41-60
-10¢: 61-75
-25¢: 76-99
Note: There are a wide variety of metals and no target can be tified for
certain until unearthed. This table is for general reference only.
2.
Types of target
-
IRON: It indicates that the target is probably iron.
-
5¢: It indicates that the target is probably or a nickel. Some
small gold rings might register within this range.
-
P-TAB: It indicates that the target is probably a pull tab of an
aluminum can. Some small gold rings might register within this
range.
-
1¢: It is indicated that the target is probably a coin of or type
of metal of zinc alloy. Some medium sized gold rings might
register within this category.
-
10¢: It indicates that the target might be a coin of 10¢. Some
large rough gold items might register within this category.
-
25¢: It indicates that the target is probably 25¢ or a silver coin.
3.
Tones
The detector comes with three tones for different types of metal.
A low tone is for IRON, , same as for foil, bottle cap or nickels. A
medium tone is for P-TAB, ZN, 1¢(aluminum pull tabs, zinc or copper
items). A high tone is for 25¢,same as for brass or silver items.
If the detector detects the item, it sounds a tone, and the cursor above
the target name will light. Also LCD displays the numeric range of
target as well as the depth(signal strength).
7