To Next PageTo Next PageWhat to do if the AC Power Indicator Light is off on my Oshkosh Truck?
If the AC Power Indicator Light on your Oshkosh Truck is off, it means the unit isn't getting AC power. Ensure the unit has continuous power. If on-site, connect to shore power. If being transported, stop the vehicle and check the fuel tank.
Why is the Transport Warning Light on in my Oshkosh Truck?
If the Transport Warning Light is on for your Oshkosh Truck, verify that the hydraulic platform lift is correctly seated in the cradles, ensure the transport pins are inserted, and confirm that the Emergency Air from the tractor is disconnected from the trailer.
General safety advice for operating and servicing the mobile unit.
Guidelines for safe handling of electrical systems and power connections.
Safety checks and procedures before and during mobile unit transport.
Explanation of the air ride control valves and their function in suspension.
Overview of various controls for lights, lifts, alarms, and emergency equipment.
Overview of the Scan Room housing the MRI equipment.
Description of the Magnet Room and location of E-Stop/Quench buttons.
Explanation of the door interlock system for RF interference.
Details about the manual fire extinguishers provided.
Overview of the fire detection system and its components.
Information on the optional fire suppression system.
Steps to lower and extend the landing and stabilizing legs.
Instructions for installing rear stabilizing stands for support.
Steps for connecting the unit to shore power.
Procedure for switching power sources from generator to shore.
Procedure for securing the Platform Lift for transport.
Guidelines for securing all equipment before transport.
Procedure for switching power sources from shore to generator.
Final checks to ensure the unit is ready for transport.
Details of the 120/208V AC electrical panel.
Details of the 480V AC electrical panel.
Information about the shore power connection.
Controls for starting and stopping the generator.
Selector for choosing between generator and line power.
Overview of the A/C and chiller unit.
Details about the humidifier system and its maintenance.
Details on the humidity controller and its settings.
Overview of safety features for the Platform Lift.
Procedures for deploying and storing the Platform Lift.
How to operate the intrusion alarm system.
Controls for the rear air suspension system.
Information on the emergency lighting system.
Explanation of various warning lights on the unit.
Routine daily checks for proper unit operation.
Scheduled weekly maintenance tasks.
Scheduled monthly maintenance tasks.
Specific maintenance tasks for the electrical system.
Maintenance for the humidifier system.
Maintenance guidelines for the HVAC system.
Checklist for setting up the mobile unit.
Checklist for transporting the mobile unit.
Troubleshooting steps for an inoperable hydraulic platform lift.
Troubleshooting steps for the AC power indicator light being off.
Troubleshooting steps when the transport warning light is on.
Troubleshooting for humidity and temperature deviations.
Procedures for controlling hazardous energy sources.
Guidelines for battery maintenance and replacement.
Procedures for checking and maintaining the oxygen sensor.
Steps for calibrating the oxygen monitor.
General