Do you have a question about the Oshkosh M1070 and is the answer not in the manual?
Summarizes critical warnings and provides guidance on how to study them for safety.
Lists operating hazards and corresponding safety recommendations and required conditions.
Illustrates and describes major components on the M1070 HET Tractor.
Details the components of the air system: compressor, reservoirs, and dryers.
Illustrates the winch system components and their controls.
Details the five major components of the CTIS and its controller.
Provides operating procedures and warnings for moving the trailer forward.
Details procedures for braking, stopping, and parking the trailer.
Provides step-by-step instructions for operating the CTIS.
Describes the PASS method for operating the fire extinguisher.
Provides steps for connecting a trailer to the HET Tractor using the fifth wheel.
Provides steps for disconnecting a trailer from the HET Tractor.
Details steps for preparing the HET Tractor and winches before operation.
Describes procedures for cable payout, vehicle connection, and recovery operations.
Step-by-step guide for starting the engine in cold conditions.
Provides instructions for operating the GPFU, including warnings.
Instructions for operating the emergency flashers.
Instructions for installing wheel chocks for safety.
Instructions for installing tire chains, including warnings and cautions.
Step-by-step procedure for connecting the tow bar.
Step-by-step procedure for disconnecting the tow bar.
Instructions for preparing the HET Tractor for towing with a tow bar.
Guidance for driving up moderate to steep grades.
Procedures to follow if wheel slippage occurs while driving up a steep grade.
Operating procedures and warnings for sand, mud, or snow conditions.
Instructions for setting up highway emergency markers.
Instructions for preparing vehicles for the slave start procedure.
Procedure for slave starting a disabled vehicle, including warnings.
Immediate actions to take for loss of air supply system pressure.
Instructions for manually releasing the spring brakes.
Instructions for manually applying the spring brakes.
Troubleshooting steps for MTS power converter failure.
Troubleshooting steps for when the CTIS will not operate.
Preventive Maintenance Checks and Services performed before operating the vehicle.
Preventive Maintenance Checks and Services performed during vehicle operation.
Preventive Maintenance Checks and Services performed after operating the vehicle.
Instructions for removing a spare tire assembly.
Instructions for installing a spare tire assembly.
Procedure for manually checking, inflating, and deflating tires.