EasyManua.ls Logo

Oshkosh M1070 - Operator Maintenance - Movement Tracking System (MTS) Power Converter Failure; MTS Power Converter Failure

Oshkosh M1070
832 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATOR MAINTENANCE
MOVEMENT TRACKING SYSTEM (MTS) POWER CONVERTER FAILURE
INITIAL SETUP:
Not Applicable
MTS POWER CONVERTER FAILURE
NOTE
The MTS power converter is part of the C4ISR kit installed in some
HET Tractors.
Not all HET Tractors are equipped with the C4ISR kit, and kit
installation locations may vary. Standard installation shown.
Follow these instructions only if the C4ISR kit is installed on your
vehicle.
Indications of a possible problem with the MTS power converter
include loss of power to the MTS mobile unit V2, and smoke, heat,
and/or ozone smell coming from the MTS battery/control box.
If a problem with the MTS power converter is indicated, perform the
following Steps:
1. If HET Tractor is in motion, bring vehicle to a stop in a safe location.
////////////////////////////////////////////////////////////////////////////////////
TM 9-2320-360-10 0082
0082-1
////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Table of Contents

Related product manuals