Table 1. PMCS - BEFORE - Continued
Item
No.
Interval
Item to
be
Checked
or
Serviced
Procedure
Equipment
Not Ready/
Available If:
b. Pull out primary lock release
handle (2) two times.
c. Put primary lock release
handle (2) in locked position.
d. Check that coupler jaws (1)
stay open with primary lock
release handle in locked
position.
Coupler
jaws will not
stay open.
3. Check that top surface of fifth
wheel (4) and fifth wheel ramps
(5) are properly and adequately
lubricated. (WP 0106)
5
5
2
1
4
Figure 4.
6
Before Fifth
Wheel
1. Check that primary lock release
handle (1) and secondary lock
TM 9-2320-360-10 0100
0100-8
To Next Page
Loading...
