TOW BAR CONNECTION - Continued
7. Separate tow bar (5) at pivot point (8).
8. Position legs of tow bar (5) in front of disabled vehicle with spare pin holders (9) facing
up.
9
14
15
13
17
16
12
5
10
11
Figure 3.
9. Remove cotter pin (10) from pin (11) on tow bar shackle (12) and remove pin from
tow bar shackle.
10. Remove cotter pin (13) from pin (14) on tow bar shackle (15). Remove pin from tow
bar shackle.
11. Align tow bar shackle (12) with tow eye (16) while two assistants hold tow bar leg.
Install pin (11) in tow bar shackle (12). Install cotter pin (10) in pin (11).
12. Align tow bar shackle (15) with tow eye (17) while two assistants hold tow bar leg.
Install pin (14) in tow bar shackle (15). Install cotter pin (13) in pin (14).
13. Align legs of tow bar (5) at pivot point (8). Install pin (7) in tow bar (5). Install cotter
pin (6) in pin (7).
TM 9-2320-360-10 0070
0070-3
To Next Page
Loading...
