OPERATOR MAINTENANCE
WINCH OPERATION
INITIAL SETUP:
Materials/Parts
Plug, Ear (WP 0116, Table 1, Item 47)
Personnel Required
Operator and Assistant - - - (2)
PREPARATION TO OPERATE WINCH
NOTE
•
Model A dash panel shown, Model B dash panel similar.
•
Both winches are required to load and unload the M1000 trailer.
However, vehicle recovery operations can be performed using only
one main winch.
1. Start engine. (WP 0037)
CAUTION
HET Tractor must be positioned in a straight line with trailer. Failure to
comply may damage winch cable.
2. Position HET Tractor on solid ground so tires have good traction. Position HET Tractor
for straight pull.
3. Turn on beacon light switch (1).
TM 9-2320-360-10 0035
0035-1
To Next Page
Loading...