OPERATOR MAINTENANCE
PREPARE HET FOR TOWING
INITIAL SETUP:
References
FM 4-30.31 (WP 0113)
FM 21-305 (WP 0113)
PREPARE HET FOR TOWING USING TOW BAR
WARNING
Personnel must not occupy towed vehicle during towing operation.
Vehicle may become disconnected while being towed. Failure to comply
may result in serious injury or death to personnel.
CAUTION
Disabled vehicle GVWR must be 49,000 lbs (22 246 kg) or less. Failure
to comply may result in damage to towing or disabled vehicle.
NOTE
Disabled vehicles must be prepared and moved in accordance with FM
20-22 (WP 0113) and FM 21-305. (WP 0113)
1. Connect tow bar between towing vehicle and disabled vehicle (WP 0070).
CAUTION
Fold in outside rear view mirrors. Failure to comply may result in damage
to equipment.
In the event of a hydraulic steering system failure, the transfer case to
No. 2 axle propshaft must be removed. Failure to comply may result in
damage to steering pumps.
2. Fold in rear view mirrors against doors.
3. Set TRANSFER CASE shift lever (1) to NEUTRAL position.
TM 9-2320-360-10 0071
0071-1
To Next Page
