Oshkosh M1070 - Installation

INSTALLATION
1. Install dipstick (1) in dipstick tube (4).
NOTE
Maintain inward pressure on dipstick while tightening.
2. Turn handle (2) clockwise until disc (3) does not turn freely.
3. Turn handle (2) clockwise an additional two turns to secure dipstick (1) in tube.
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (WP 0064).
END OF TASK
END OF WORK PACKAGE
TM 9-2320-360-10 0110
0110-2