Osmio Zero IP-II - Filter maintenance; Introduction; Filter replacement; Replacing the Pre Filter

http://www.osmiowater.co.uk/manuals/MiniDUE%20Instruction%20Booklet.pdf
5 Filter maintenance
5.1 Introduction
• Use the company's certified filters. Disconnect the power. Do not
disassemble or attempt to modify this product.
5.2 Filter replacement
5.2.1 Replacing the Pre Filter
• The pre-filter (PP) screwed in inside the Supply Pitcher should be changed
every 6 months. or when needed (e.g. if blocked by poor source water
quality).
STEP 3 Unscrew the used pre filter
and screw in the new one
STEP 2 Lift the Supply Pitcher
vertically up and out out keeping
it flat
STEP 4 Swivel the filter to align the
current month number to the
Replacement Mark indicator
STEP 1 Open the lid of the Supply
Pitcher and wait for 5 seconds
Lorem ipsum