AETHER | ARIEL SERIES
8
FEATURE DETAILS
RAINCOVER
1 Locate raincover icon on the toplid.
2 Remove raincover from compartment
and slip it over the top and bottom of
the pack.
3 Tighten the cord lock at the bottom of
raincover to tension raincover into place.
4 To detach raincover, unfasten toggle
from cord loop.
Tip: To prevent mildew, allow raincover to dry
entirely before storing.
SLEEPING PAD STRAPS
Removable sleeping pad straps for external
attachment.
1 Unclip the two sleeping pad strap
buckles
2 Remove the webbing from the triglide
at the base of the pack
3 Reverse to reattach
DUAL ICE TOOL ATTACHMENT
The ice tool loops and bungee tieoffs
provide secure tool attachment.
1 Slide the tool shaft through the top of
the ice tool loop and flip the shaft up
toward the top of the pack.
2 Loosen the bungee cord lock and
route the tool handle through the
bungee. Tighten the cord lock nesting
it into the Y-clip to secure the tool into
place.
3 Reverse to remove.
INTERNAL RESERVOIR SLEEVE
Place reservoir inside sleeve to help ensure
proper pack weight distribution. Clip
reservoir to buckled loop to keep upright.
SLEEPING BAG COMPARTMENT
Lower zippered compartment for dedicated
sleeping bag storage. Detach the divider for
unimpeded access to pack interior. Unthread
the divider webbing from the triglide buckle,
and reverse to reattach.
DUAL UPPER AND LOWER SIDE
COMPRESSION STRAPS
Upper and lower compression straps
provide added stability when the pack
is not full or offer additional attachment
points for carrying gear on the outside
of the pack.
DUAL STRAIGHTJACKET
COMPRESSION STRAPS
Dual front panel compression
straps help stabilize loads. When
minimal pack volume is needed, the
compression straps can be attached
to the additional StraightJacket.
ZIPPERED HIPBELT POCKETS
DUAL MESH SIDE POCKETS
LARGE FRONT PANEL ZIP ACCESS
TO MAIN COMPARTMENT
To Next Page
Loading...
