Osprey KESTREL 68 User Manual

KESTREL / KYTE SERIES
8
1 While releasing the ladder locks,
located on either side of the
backpanel directly above the
lumbar, slide the harness up
along the LightWire frame to the
appropriate torso length.
1 Slide the harness down along the
LightWire frame to the appropriate
torso length.
2 It is easiest to do this one side at a
time, sliding the harness with one
ladder lock and then the other.
2 Use the white markings on the
edge of the backpanel as a
guideline to align each side of the
harness.
TORSO LENGTH ADJUSTMENT STEPS - AIRS CAPE
PACK FIT INSTRUCTIONS
SIZING/FIT DISCLAIMER: Pack depicted in images
may not be the pack represented in this owner’s manual.
3 Use the white markings on the
edge of the backpanel as a
guideline to align each side of the
harness. When the pack is not in
use, the harness will easily slide
up and down the LightWire frame.
However, when the pack is on-
body, the ladder locks will engage
the harness’ webbing and the
harness will adjust to the desired
height.
3 Tighten the webbing at the ladder
locks, located on either side of
the backpanel directly above the
lumbar, to tension.
TO LENGTHEN THE TORSO LENGTH: TO SHORTEN THE TORSO LENGTH:

Osprey KESTREL 68 Specifications

General

Gender	Unisex
Material	Nylon
Product main color	Black

Weight and Dimensions

Width	370 mm
Height	780 mm
Weight	1800 g