5
ENGLISH
Pro-Flex XC Torsion is referred to as the device in the following document.
This document provides important information on the indications for
use, and handling of the device. It is intended for use by a certified
prosthetist and the user of the device. The device may only be fitted by
a qualified practitioner authorized by Össur after completing the
corresponding training.
PRODUCT DESCRIPTION
The device is a mechanical foot with an integrated torsion and shock
absorbing adapter, and male pyramid.
The device consists of the following components: (Figure )
. Torsion shock assembly
. Pyramid cover
. Upper C blade
. Lower C blade
. Bottom blade
. Spectra Sock
. Foot cover
INDICATIONS FOR USE
Lower limb amputation
CONTRAINDICATIONS
None known
INTENDED USE
The device is a non-invasive, reusable prosthetic device, designed for
single patient use. The device is to be used exclusively for the
exo-prosthetic fittings of people with lower-limb loss. The device
supports low to high impact levels.
TECHNICAL SPECIFICATIONS Figure
The following specifications are for a size category foot with foot
cover:
• Product weight with footcover : g / . lbs
• Foot cover weight: g / . lbs
• Build height: mm / /"
• Maximum user weight: kg / lbs
CATEGORY SELECTION CHART
Please refer to the selection chart below to determine the appropriate
category required according to Össur recommendations.
NB: Incorrect category selection may result in poor device function. The
weight limit is kg for low active users, kg for moderate active
users, and kg for high active users.
To Next Page
Loading...
Need help?
General
