EU DECLARATION OF CONFORMITY
We hereby confirm that our products comply with the requirements in the following
EU-directives and harmonised standards and regulations.
Manufacturer: H. ÖSTBERG AB
Industrigatan 2
SE-774 35 Avesta, Sweden
Tel No +46 226 860 00
Fax No +46 226 860 05
http://www.ostberg.com
info@ostberg.com
VAT No SE 556301-2201
Products: Duct fans: CK, RK, RKC, RKB, LPKB, LPKBS, IRE, IRB, BFS, BFC
Radial fans: RBE
Wall fans: CV, KV, RS
Roof fans: TKK, TKS, TKC, TKV, TKH
Exhaust fans: IFK, IFA, CAU
Supply air units: SAU
Suspended foundation ventilation: TERU
This EU declaration is applicable only if the installation is made in accordance with the enclosed installation instructions
and that the product has not been modified.
Low Voltage Directive (LVD) 2014/35/EU
Harmonised standards:
x EN 60335-1:2012 Household and similar electrical appliances - Part 1: General requirements
x EN 60335-2-80:2003 Household and similar electrical appliances - safety- Part 2: Particular requirements for fans
x EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with
regard to human exposure
Directive for Electromagnetic Compatibility (EMC) 2014/30/EU
Harmonised standards:
x EN 61000-6-1:2007 Electromagnetic compatibility (EMC) - Generic standards - Immunity for residential, commercial
and light-industrial environments
x EN 61000-6-2:2005 Electromagnetic compatibility (EMC) - Generic standards - Immunity for industrial environments
x EN 61000-6-3:2007 Electromagnetic compatibility (EMC) - Generic standards - Emission standard for residential,
commercial and light-industrial environments
x EN 61000-6-4:2007 Electromagnetic compatibility (EMC) - Generic standards - Emission standard for industrial
environments
Machinery Directive (MD) 2006/42/EC
Harmonised standards:
x EN ISO 12100:2010 Safety of machinery - General principles for design – Risk assessment and risk reduction
x EN ISO 13857:2019 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower
limbs.
x EN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1: General requirements
Ecodesign Directive 2009/125/EC
Harmonised regulation:
x 1253/2014 Ecodesign requirements for ventilation units
x 1254/2014 Energy labeling of residential ventilation units (Where applicable)
RoHS 2011/65/EU, 2015/863/EU
Harmonised standards:
x EN 50581:2012
Avesta 2019-11-21
Mikael Östberg
Technical development Manager
9
ENGLISH
1270002_utg20_standard_sv_en_ty.indd 9 2020-01-07 16:55:49
1270002_utg20_standard_sv_en_ty.pdf 91270002_utg20_standard_sv_en_ty.pdf 9 2020-01-07 16:58:412020-01-07 16:58:41
To Next Page
Loading...
Need help?
General
