English-8 English-9
CLEANING, STORING AND CARING FOR YOUR
OSTER
®
FOOD PROCESSOR
When you have finished processing, unplug the food processor from
the electrical outlet and remove the cover, all attachments and the bowl
from the motor base.
Wipe the base of your unit a damp cloth, then wipe lightly with a dry one.
NEVER IMMERSE THE MOTOR BASE IN ANY LIQUID.
The bowl, cover, case, chopping blades, disk, blade shaft and food pusher
are all dishwasher safe. These parts may be cleaned on the top rack of
a dishwasher.
REMEMBER TO USE EXTREME CAUTION WHEN HANDLING
THE CUTTING BLADE AND BLADE ATTACHMENTS. THEY ARE
VERY SHARP!
Cleaning the internal shaft of your chopping blade is most important.
We suggest the use of a small baby bottle brush to remove any food particles,
then wash and dry the shaft thoroughly.
We suggest that you store the food processor on a dry counter or table-top in
your kitchen, where it will always be ready for immediate use. Store the cutting
blade in the clear container. Store the blade attachments in a safe location
(OUT OF THE REACH OF CHILDREN). The blades are EXTREMELY
sharp! Use caution when handling the blades.
After washing and drying the bowl, you may wish to apply a small amount
of vegetable oil to the rim of the cover and bowl. This lubrication allows the
cover to move freely when in contact with the bowl.
ALWAYS STORE BLADE AND BLADE ATTACHMENTS
OUT OF THE REACH OF CHILDREN!
PIZZA DOUGH
1 cup warm water
(between 85°F – 115°F : 30°C – 46°C)
2 tablespoons yeast
2 tablespoons honey
1/4 cup olive oil
1/2 teaspoon salt
3-1/2 cups flour
Place dough blade on drive shaft. Place all flour in food processor.
Add the yeast. Lock the lid in place. Dissolve honey and salt in warm
water and pour mixture in slowly while the food processor is
running. Mix for approximately 60 seconds. Add the olive oil and
mix until blended (approximately 1 – 2 minutes more). The dough
will turn into a ball and will roll around the processor.
To Next Page
Loading...
