EasyManua.ls Logo

Oster BVSTEM7400 - Page 72

Oster BVSTEM7400
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important: The Descaling Cycle can
be exited at any point by pressing the
MANUAL BREW BUTTON.
Step 1. Descaling Cycle of Portafilter
and steam wand
- Turn the DIAL to the STEAM position.
- The STEAM LIGHT will
now be fully illuminated.
- The Pump will start and hot water will run from the
Group Head & Steam Wand. Over a pre-defined
period the Pump will make different noises.
- When hot water has stopped being released
from the Group Head & Steam Wand, this step is
finished.
- To indicate the machine has finished this step the
machine will beep, the STEAM LIGHT will now
start to flash.
- Turn the DIAL to the vertical position, and the
Steam light will extinguish.
- The Descale icon will
continue to pulse.
Move to Step 2.
Step 2. Descaling Cycle of Hot water tap
Turn the DIAL to the HOT WATER position.
- The HOT WATER LIGHT will now be fully
illuminated.
- The Pump will start and hot water will run from
the Hot Water tap. Over a pre-defined period the
Pump will make different noises.
- When hot water has stopped being released from
the Hot water tap, this step is finished.
- To indicate the machine has finished this step the
machine will beep, the HOT WATER LIGHT will
now start to flash.
- Turn the DIAL to the vertical position, and the hot
water light will extinguish
- The Descale icon
will continue to pulse.
Move to Step 3.
Step 3. Preparing for Purge
Important: There is a maximum of 5 minutes
allowed to complete this step before the
Descaling Cycle will exit.
- The Steam Wand & Group Head now need to be
purged clean with fresh water to remove descaling
solution.
Rinse Water Reservoir
Remove the Water Reservoir and rinse thoroughly
under running water, ensuring that all traces of the
descaling solution.
Fill Water Reservoir
- Fill the Water Reservoir to the ‘Max’ line with cold
water and insert into position.
Empty Containers
- Empty water from the containers and replace.
Move to Step 4.
Step 4. Start Purge
- Turn the DIAL to the STEAM position.
DESCALING CYCLE – ESPRESSO MACHINE
English - 35
BVSTEM7400_23PEM1_PORT/ENG.indd 35BVSTEM7400_23PEM1_PORT/ENG.indd 35 2023/11/28 10:502023/11/28 10:50