Why is my Oster Hair Clipper motor not running?
If your Oster Hair Clipper motor isn't running, first ensure the battery is charged. If that's not the issue, try switching the clipper to the OFF position and cleaning the contacts. A blocked clipper-head can also prevent the motor from running, so be sure to clean and oil it. If these steps don't resolve the problem, the battery may be faulty, or the motor and/or electronics might need replacement.
What to do if my Oster Cordless Fast Feed Hair Clipper cuts badly or not at all?
If your Oster Hair Clipper is cutting poorly, the blades may be blunt and require re-sharpening by an authorized service center. Ensure the blades are oiled every 15 minutes during use. Also, check for any hairs jammed between the top and bottom blades; if present, remove the clipper-head, push the top blade half away, and clear the hairs. Lastly, the clipper-head might have too little clipping pressure and require inspection.
Why does my Oster Cordless Fast Feed Hair Clipper have short running time and hot blades?
If the running time of your Oster Hair Clipper's fully charged battery is too short, or the blades are getting hot, make sure you are oiling the clipper blades sufficiently. Also, ensure that you are using only intact, fully charged original batteries, as a faulty battery can cause these issues.
How to fix an Oster Cordless Fast Feed Hair Clipper when the top blade does not move?
If the top blade of your Oster Hair Clipper isn't moving, it could be that the clipper-head isn't properly engaged. Make sure to engage the clipper-head correctly while the motor is running. It's also possible that the drive carrier is defective and needs replacement.
Why does my Oster Hair Clipper motor run very slowly?
If the motor of your Oster Hair Clipper runs very slowly, it is possible that the clipper blades were not oiled sufficiently. Make sure to oil clipper blades.
What to do if the light on my Oster Cordless Fast Feed Hair Clipper doesn't change from green to red?
If the light on your Oster Hair Clipper does not change from green to red when the battery is unloaded, try cleaning the contacts first. If that doesn't solve the issue, the battery might be faulty and need replacement.
General| Brand | Oster |
|---|---|
| Model | Cordless Fast Feed |
| Category | Hair Clipper |
| Language | English |
Details precautions to reduce the risk of electric shock, including handling fallen appliances and avoiding water.
Provides warnings to prevent burns, fire, electric shock, or injury, covering unattended appliances and child supervision.
Details about the Li-Ion battery, including its capacity, initial charging, longevity, and usage time.
Details on charging the unit, including LED indicator status for different battery levels and charging states.
Steps for operating the clipper wirelessly, including turning it on, using it, and turning it off.
Covers blade adjustment, removal, replacement, lubrication, and sharpening procedures for optimal performance.
Guidelines for proper storage of the appliance to maintain its condition and prevent cord damage.
Detailed steps for cleaning the clipper blades using cleaning solution, oiling, and drying.
Instructions for cleaning the charging station, its cavities, and the trimmer/stand contacts.
Information on proper disposal of appliances in EU countries according to directive for environmental protection.
Guidelines for disposing of the appliance in a friendly manner according to local and national laws.
To Next Page
