To Next PageTo Next PageWhy is my Oster Hair Clipper not running?
Your Oster Hair Clipper might not be running due to several reasons: the battery may not be charged, so you should charge it; the contacts might be dirty, in which case you should switch the clipper off and clean the contacts; or the clipper-head might be blocked, so you should clean and oil it.
What to do if my Oster Hair Clipper cuts badly or not at all?
If your Oster Hair Clipper isn't cutting well, the clipper blade might be blunt, requiring re-sharpening by an authorized service center. Also, ensure the blades are oiled every 15 minutes. Hairs jammed between the top and bottom blades can also cause this issue; remove the clipper-head, push the top blade half away from the clipper head, and clear any hairs. Finally, the clipper-head may have too little clipping pressure.
General| Motor Type | Universal Rotary Motor |
|---|---|
| Speed Settings | 2 |
| Power Source | Corded Electric |
| Voltage | 120V |
| Type | Hair Clipper |
| SPM | 3, 000 - 4, 000 SPM |
| Blade Compatibility | Oster A5 blades |
| Cutting Lengths | Adjustable |
| Included Accessories | Blade oil, cleaning brush |
