CARING FOR YOUR IRON AFTER USE
TURNING OFF IRON: Turn Steam Select Switch to (Dry) and Temperature Control Dial
to Off. Unplug.
WARNING: NEVER yank power cord when unplugging iron. This can damage the cord.
Empty water reservoir completely after each use.
STORING YOUR IRON
1. Turn off iron, unplug and allow to cool.
2. Empty water reservoir after each use.
3. Loosely loop the power cord around the heel rest and store the iron on its heel rest.
IMPORTANT: Wrapping the cord around the iron too tightly can damage the cord.
English - 7
To Next Page
Loading...
