GROUP OF COMPANIES
A.C.N. 076 468 481
The Provet Group of Companies and The Australian Veterinary Association
PARTNERS IN PRACTICE
Provet Supplies Pty Ltd - Brisbane
Provet Pty Ltd - Brisbane
Provet Queensland Pty Ltd - Brisbane
Provet North Queensland - Townsville
Provet NSW Pty Ltd - Sydney
Provet IT Pty Ltd - Sydney
Provet VMS Pty Ltd - Newcastle
Provet Riverina Pty Ltd - Wagga Wagga
Provet Allhank Pty Ltd - Melbourne
Provet NZ Pty Ltd - Auckland
Oster Golden A5
Care and Maintenance
DO NOT!
• Attempt to work on the clipper with it connected to the main power supply.
• Attempt to clip a wet or perspiring animal.
• Touch the blades when moving!
• Switch the machine on with loose or missing blades.
• (In the interests of safety ensure that both blades are tightly seated.)
• Push the clipper through the hair in order to force it to clip, rather guide the machine
• In the direction you want to clip and let the machine do the work!
• Use if the voltage at your site is different to that on the clipper information data.
• Attempt to take apart or assemble the blades or any parts of the clipper over straw, shavings
or other materials. Only carry out such tasks on a specified area i.e. tables or workbench
otherwise essential parts may be lost.
• Immerse either the machine or cutter head in liquid (oil/diesel/lubricant) of any kind.
To Next Page
Need help?
General
