Oster Juice & Blend 2 Go FPSTJE3166 User Manual

www.oster.com
www.oster.com
4
5
HOW TO:
Assembling the Juice Extractor
Follow the assembling instructions listed below
before using your Juice Extractor:
• Before you start assembling your juice extractor,
make sure it is unplugged and it is placed on a dry
and level surface.
• Place lter basket on top of the motor base
(Figure 1).
• Place the stainless steel lter on top of the lter
basket pushing down and turning it until it ts
into the grooves of the motor shaft (Figure 2).
• Place juicer cover/lid on top of the lter basket
(Figure 3).
• Raise the safety locking arms and then lower them to
securely t into the grooves in the lid and then rmly
press lower part of the locking arms into the unit
ensuring they lock the lid into the unit (Figure 4).
• Place the pulp container into position by tilting
it slightly (Figure 5) Important: Make sure Pulp
Container edge is underneath the lip of the
basket.
• Place a glass or jar under the spout located on the
right hand side of the juicer (Figure 6).
Figure 1
Figure 2
Figure 4
Figure 5
Figure 3
Figure 6
Powerful 400-watt
Motor
Safety Locking Arms
(both sides)
Food Chute
Stainless Steel Filter
Filter Basket
Large Pulp Collector
Container
ON/OFF Switch (I/O)
Food Pusher
Juice Extractor Lid/
Cover
Motor Base Housing
Safety Switch (both
sides)
Blender Assembly with
Blade
To-Go-Jar
Lid
LEARNING ABOUT YOUR
JUICE EXTRACTOR & PERSONAL BLENDER
a
b
e
g
h
i
j
c
d
f
l
m
n
k
i
a
b
c
d
e
f
g
h
j
k
l
m
n

Oster Juice & Blend 2 Go FPSTJE3166 Specifications

General

Brand	Oster
Model	Juice & Blend 2 Go FPSTJE3166
Category	Kitchen Appliances
Language	English