English - 6
To Use the Toast Function (See Fig. 4)
Select desired rack position. (See “Positioning Rack” Section)
NOTE: Different types of bread require different settings. Lighter
breads and wafes require lighter setting. Darker breads, mufns
and English mufns require a darker setting.
Step 1. Place food on Wire Rack. For best toasting results,
position the rack in the middle position.
Step 2. Close glass doors completely.
Step 3. Turn the Function dial to Toast “ ”. Both the top and
bottom heater elements will operate.
Step 4. Turn the temperature control knob to 230°C.
Step 5. To set the timer, turn the timer past the 20 minute mark
to engage timer switch and set back to desired toast
time.
Step 6. When toasting is complete, a bell will sound. Open
doors completely and remove food. CAUTION: Cooked
food and metal rack can be very hot, handle with care.
Do not leave Countertop Oven unattended.
To Use the Air Fry Function (See Fig. 5)
Step 1. Place food evenly on the Air Fry Basket. For foods with
high amounts of fat or grease, it is recommended to
place the baking pan below the Air Fry Basket or Wire
Rack during the cooking cycle.
Step 2. Carefully slide the Air Fry Basket into the middle rack
position and close the countertop oven door.
Step 3. Turn the Function dial to Air Fry “ ”.
Step 4. Turn the Temperature dial to the desired temperature.
Step 5. Turn the Timer to desired cooking time.
NOTE: If cook time is less than 20 minutes, you must turn
Timer past the 20 minute mark to engage the timer then back to
desired time.
Step 6. When the Air Fry cycle is complete, open door
completely and remove food.
WARNING: Cooked food, Air Fry Basket, Baking Pan, and door
can be very hot, handle with care. Do not leave Countertop Oven
unattended.
Figure 4
Figure 5
TSSTTVFDMAFNS_22SEM1 (LA).indd 6TSSTTVFDMAFNS_22SEM1 (LA).indd 6 2022/5/13 上午11:382022/5/13 上午11:38
To Next Page
Loading...
