OTC Tools OTC 3209 - Page 10

Display Test
Used to check the display.
Keypad Test
Veriesthatthekeysareworkingcorrectly.
Memory Test
ChecksRAMandFlashROM.
Program Mode
Used for updating the Scan Tool.
Charging System Monitor
Thisfunctionisusedtomonitorthevoltagepresentonpin16ofthe
OBD II Data Link connector.
Acronyms
Allows the user to view acronyms and abbreviations used by the
Scan Tool.
Component Locator
Tool will display a list of components and their locations on the
vehicle.ThisfunctionwillalwaysappearontheMainMenu.This
selectionwillappearontheDiagnosticMenuonlywhenthetoolhas
a list of component locations for the currently selected vehicle.
10
|
Quick Start Guide
|
OTC3209
|
en
575516 REV A | 05.2015 Bosch Automotive Service Solutions Inc.