OTC 6522 - Initial Setup

5
Initial Setup
1. Pour entire contents of one (1) 8-oz. UltraTraceUV
®
solution bottle into the vapor chamber.
CAUTION: Use only UltraTraceUV
solution in the LeakTamer. Using solutions
not recommended by the manufacturer
may (1) damage the vehicle being tested,
(2) damage the unit, and (3) cause operator
injury.
NOTE: Use second bottle of UltraTraceUV solution
to regularly maintain at or near the FULL mark
on the dipstick.
2. Install correct air tting onto the LeakTamer, if not
supplied.