oticon Genie 2 - Introduction; Intended Use

Introduction
The following instructions for use are valid for
OticonGenie2 2021.2.
Genie2 is a fitting software used for OticonMore™,
OticonOpnS™, OticonOpn™, OticonXceed,
OticonOpnPlay™, OticonXceedPlay, OticonRuby,
and OticonSiya hearing instrument families.
If you have additional questions about the use of Genie2,
contact your local distributor.
A printed version of this booklet can be obtained through
your local distributor.
About Working in Genie 2 Warnings
More info
Intended use
Intended use
The fitting software is intended for fitting
and updating of hearing solutions. The fitting
software can facilitate access to real-ear
measurement equipment.
Indications for use
There are no indications for use (diagnoses)
for the fitting software itself.
Intended user
The fitting software solution is intended to
be used by Hearing Care Professionals (HCP)
who in this document are referred to as, but
are not limited to, Hearing Aid Professionals
(HAP), audiologists, ENT (ear, nose and throat)
doctors, and Hearing Aid Dispensers (HAD).*
The user of the fitting software shall be a
hearing care professional who is appropriately
trained, and has proven competency in
professionally assessing hearing, selecting,
fitting and delivering hearing instruments
and rehabilitation care to persons with
hearing loss. The training of the hearing
care professional is in accordance with their
specific educational background following
national or regional regulations.
*The job title may vary from country to
country.
User environment
Clinical setting.
Contraindications
No contraindications.
Clinical benefits
See clinical benefits of the hearing aid.