oticon Sumo DM User Manual

The visual status indicator will fl ash according to the program
that is active, when the instrument is ready.
When you change program the visual status indicator will fl ash
according to the program selected.
Follows audible beep setting
Your volume control is programmed to work under normal
conditions at a certain level. When this level is reached by
adjusting your volume control the visual status indicator will
fl ash three times.
This feature can be disabled.
The visual status indicator can be programmed to be steady On,
while the instrument is working.
This is default On for users of age 7 and below. The feature can
be enabled or disabled.
If steady light is enabled, it will turn permanently Off when the
Battery Low beeps are activated to indicate the battery should be
changed.
Audible and visible status indicators
Table of behavior:
Audible beeps Visual status indicator (LED)
Your instrument has two means of status indication, the audible
beeps and a visual status indicator (LED). The behaviour of
these status indicators can be confi gured by your Hearing
Care Professional. In the table below you fi nd an overview of
the behavior and the possible confi gurations of your status
indicators.
Instrument ready
Program switch
VC preferred level
setting
Indicate that
instrument is On
Battery low
indicator
The instrument will beep according to
the program that is active, when the
instrument is ready.
When you change program the
instrument will beep according to the
program selected.
This feature can be disabled.
Your volume control is programmed
to work under normal conditions at a
certain level. When this level is reached
by adjusting your volume control your
instrument will beep three times.
This feature can be disabled.
When the battery power is low, you will
hear a series of two beeps.
20 21
The visual status indicator will fl ash according to the program
that is active, when the instrument is ready.
When you change program the visual status indicator will fl ash
according to the program selected.
Follows audible beep setting
Your volume control is programmed to work under normal
conditions at a certain level. When this level is reached by
adjusting your volume control the visual status indicator will
fl ash three times.
This feature can be disabled.
The visual status indicator can be programmed to be steady On,
while the instrument is working.
This is default On for users of age 7 and below. The feature can
be enabled or disabled.
If steady light is enabled, it will turn permanently Off when the
Battery Low beeps are activated to indicate the battery should be
changed.
Audible and visible status indicators
Table of behavior:
Audible beeps Visual status indicator (LED)
Your instrument has two means of status indication, the audible
beeps and a visual status indicator (LED). The behaviour of
these status indicators can be confi gured by your Hearing
Care Professional. In the table below you fi nd an overview of
the behavior and the possible confi gurations of your status
indicators.
Instrument ready
Program switch
VC preferred level
setting
Indicate that
instrument is On
Battery low
indicator
The instrument will beep according to
the program that is active, when the
instrument is ready.
When you change program the
instrument will beep according to the
program selected.
This feature can be disabled.
Your volume control is programmed
to work under normal conditions at a
certain level. When this level is reached
by adjusting your volume control your
instrument will beep three times.
This feature can be disabled.
When the battery power is low, you will
hear a series of two beeps.

oticon Sumo DM Specifications

General

Brand	oticon
Model	Sumo DM
Category	Hearing Aid
Language	English