PRODUCT INFORMATION
PULL-FORCE MEASUREMENT SYSTEM POWER-CHECK 2
3 ASSEMBLY OF ADAPTER
3.1 PREPARATION
The contact surfaces of the basic unit and the adapter must be clean and undamaged!
3.2 ASSEMBLY
HSK to nominal size A 63/B 80
and
PSC up to nominal size 63
Screw on pull stud and
tighten
Secure pull stud Attach compression ring;
secured by a spring loaded
ball
POWER-CHECK-2_PE_2015-09
Subject to modification due to technical advance! // 14
To Next Page
Loading...