OTT-JAKOB Power-Check 2

To Next Page
To Previous Page
PRODUCT INFORMATION
PULL-FORCE MEASUREMENT SYSTEM   POWER-CHECK  2
2.5.9 Adapter for hollow shaft with gripper groove for automatic tool change  
Nominal size Order number
A 40 / B 50 95.602.120.3.2
A 50 / B 63 95.602.046.3.2
A 63 / B 80 95.601.851.9.2
A 80 / B 100 95.602.140.3.2
A 100 / B 125 95.602.047.3.2
A 125 / B 160 95.602.048.3.2  * 
     Adjustment of the adjustable range ( → # 4.1 /  17  ) not possible!  
-.#! (/
2.5.10Adapter for KM with gripper groove for automatic tool change
Nominal size Order number
, 50 ISO -1 95.602.863.3.2
, 63 ISO -1 95.602.711.3.2
, 80 ISO -1 95.602.974.3.2
    Adjustment of the adjustable range ( → # 4.1 /  17  ) not possible!  
2.5.11Adapter for steep taper with gripper groove for automatic tool change
Nominal 
size
DIN 69871 / 69872
ISO 7388 / 1 / 2 
Typ A
ANSI B 5.50-78
ISO 7388 / 1 / 2 
Typ B
MAS 403-1982
BT / PT-I (45°)
MAS 403-1982
BT / PT-II (30°)
SK 30 95.103.310.3.2 95.103.311.3.2 95.103.312.3.2 95.103.313.3.2
SK 40 95.103.237.3.2 95.103.238.3.2 95.103.239.3.2 95.103.240.3.2
SK 50 95.103.097.9.2 95.103.241.3.2 95.103.242.3.2 95.103.243.3.2
    Adjustment of the adjustable range ( → # 4.1 /  17  ) not possible!  
Other adapters available on request!
POWER-CHECK-2_PE_2015-09  
Subject to modification due to technical advance!     //  13
OTT-JAKOB Power-Check 2 - Page 13
