OTT-JAKOB Power-Check 2 - Page 17

PRODUCT INFORMATION
PULL-FORCE MEASUREMENT SYSTEM POWER-CHECK 2
4.1 ADJUSTMENT-OF THE ADJUSTABLE RANGE
Adjusting the adjustable range (sleeve position) is possible in a released condition only!
Adjustment is not possible at adapter with gripper groove!
Screw in adjustable sleeve delicately to the
shoulder
Turn back adjustable sleeve after it passed the 0-
mark the first time
The Power-Check with the adapter now is set to the medium tolerance field of the corresponding
tool standard.
Turning the adjustable sleeve toward "+" makes the adapter longer, turning it toward "-" makes the
adapter shorter
Adjustment way:
Power-Check 2
basic unit - size
Eine Rastung
on the adjustable sleeve correlates
5 0,05 mm
20, 75, 200 0,1 mm
The adjustable sleeve must be always engaged!
Theoretical adjustment range per tool standard
HSK
!"
234
KM
according
234
PSC
according
234
SK
according
• 234
).*05
• 62/
• 03
basic
unit -
size
adjustment
way [mm]
detent
adjustment
way [mm]
detent
adjustment
way [mm]
detent
adjustment
way [mm]
detent
5 +/- 0,05 +/- 1 - - - - - -
20
75
200
+/- 0,1 +/- 1 +/- 0,1 +/- 1 +/- 0,2 +/- 2 +/- 0,3 +/- 3
In addition regard the temperature and mechanical wear of the spindle.
POWER-CHECK-2_PE_2015-09
Subject to modification due to technical advance! // 17