OTT-JAKOB Power-Check 2 User Manual

PRODUCT INFORMATION
PULL-FORCE MEASUREMENT SYSTEM POWER-CHECK 2
Approvals
We hereby declare that the device, both in its basic design and construction and in the version marked by us, conforms to the
relevant requirements of the R&TTE directive 1995/5/EG (Europe) and of the
ARIB-STD-T66 directive (Japan)
Norms applied:
DIN EN 61000-6-2
DIN EN 61000-6-4
ETSI EN 301 489-3
ETSI EN 300 440-2
DIN EN 60950-1
ARIB-STD-T66
WEEE Notice
The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February
2003, resulted in a major change in the treatment of electrical equipment at end-of-life.
To dispose the device, please return to OTT-JAKOB Spanntechnik GmbH. The OTT-JAKOB company will dispose of the device
professionally with regard to all laws and conditions (ElektroG § 10.2). The user is NOT allowed to dispose of the POWER-CHECK 2
himself or to put it into normal dustbins or collection points.
WEEE-Reg.-Nr. DE 93666638
RoHS Compliance
This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 08. June 2011, on the
restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.
Li-Ion
5V DC 500mA
Made in Germany
204-360001
POWER-CHECK-2_PE_2015-09
Subject to modification due to technical advance! // 4

OTT-JAKOB Power-Check 2 Specifications

General

Brand	OTT-JAKOB
Model	Power-Check 2
Category	Measuring Instruments
Language	English