OTT-JAKOB Power-Check 2 User Manual

PRODUCT INFORMATION
PULL-FORCE MEASUREMENT SYSTEM POWER-CHECK 2
1 SAFETY NOTES
Consider always the following points:
Follow the operating instructions
Avoid impacts and vibrations to the system
The system may be operated only within the specified technical values and limits.
Commissioning, adjustments and operation is allowed only by qualified personnel.
In the cases of improper system adjustment or use, the OTT-JAKOB company will not
accept any liability.
1.1 INTENDED USE
The pull-force measurement system has been designed for an industrial environment. It measures the
pull-force in the power drawbar.
The measured pull-force can be read from the display during manual operation. In addition, the measured
value will be stored.
During automatic operation, the measured value is stored internally for use during the automatic tool
change.
The wireless version sends the measuring value to the receiving device.
The measured value can be logged using the Power-Check 2 - PC-Software (USB interface)
POWER-CHECK-2_PE_2015-09
Subject to modification due to technical advance! // 5

OTT-JAKOB Power-Check 2 Specifications

General

Brand	OTT-JAKOB
Model	Power-Check 2
Category	Measuring Instruments
Language	English