OTT Pluvio - Pluvio Type 250 Wiring; Connection Terminals Overview; Terminal Function Mapping

Pluvio type 250 with status output
123123
3
123456
123456
1
2
3
2
1
1
2
red/blue Contact (0.01 mm; 30 Hz)
yellow
green/pink
violet
grey
pink
blue
red
black
brown
green
white
Status (10 Hz)
Status (10 Hz)
Contact (0.01 mm; 30 Hz)
20 mA – (current source; 0.01 mm)
20 mA + (current source; status)
20 mA – (current source; status)
20 mA + (current source; 0.01 mm)
+12 VDC (supply)
GND (supply)
8…24 V (supply current source)
GND (supply current source)
Status
Pluvio precipitation
Connection
for sensors/outputs
Connection
for +12 V DC
from contact of housing
CONTACT CONTACT 20 mA + 20 mA -
CONTACT
Status (10 Hz)
Resolution 0.01 mm
black
green / pink
Supply current source -
violet
grey
black
pink
grey
CONTACT
red / blue
20 mA + Supply current source + 20 mA -
yellow green red blue
weighing cell
black red
Shield
white green
Supply GND Supply +12 VDC n. c. n. c. +12 V n. c.
white brown
}
PWR
Connection of